Apply for a permit to fell an ash tree on private property

Last updated March 1, 2024

Want to have an ash tree on your property felled? In Montréal, a tree-felling permit (also known as an authorization certificate) is required to do so. Find out how to get one here.

Before felling a tree on your property, make sure your tree is compliant with terms and conditions for a felling permit by selecting your borough below.

My borough

Shows borough content for
Find a borough to filter the list of search content.

No borough selected.

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

However, if, during our inspection, it turns out the tree is not an ash tree or if trees of other species must be felled in addition to the ash tree, you must pay the fee online or go back to the permit counter to pay application processing fees of $96.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must contact the permit counter about your project. Felling your ash tree may be included in the permit issued for your work.
  • It risks causing a disease or an invasive species to spread.
  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, or twigs
  • because it produces pollen, sap, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it.  Failure to replace a felled ash tree may be subject to a fine. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form online.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan or copy of certificate of location  used as a plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter on the plan)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner, or resolution from the condominium syndicate, or proof of the composition of the condominium’s board of directors and a letter of authorization from each of its members

Apply for the permit

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

555 Rue Chabanel Ouest
Suite 600
Montréal, QC H2N 2H8

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

In person

Point of service

By appointment
7171 Rue Bombardier
Second floor
Montréal, QC H1J 2E9

Legislation

You are required to obtain a certificate of authorization to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This certificate is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a certificate:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a tree-felling certificate of authorization to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone, in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.

Please note: It is prohibited to fell a tree if it is located on the projected site of a basement area, an advertising sign, an outbuilding, a fence, a terrace, a balcony, a pergola, a seasonal construction, or a removable or recreational piece of equipment. You must find another site for your project.

  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling certificate of authorization is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

Documents

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

 

Mount Royal heritage site

Do you live on the Mount Royal heritage site? If so, an additional authorization is required.

Fill out the authorization form for a classified heritage property (above) and add it to the following documents to be submitted:

  • Report drafted by a forest engineer, indicating whether stump removal is required and/or if the cut is done at ground level.
  • Planting plan showing the location, species and dimensions of the replacement trees, along with the method and dimensions of the excavation required. The replacement tree species must be among those shown on the list of indigenous species on Mount Royal.

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

By appointment
5160 Boulevard Décarie
Montréal, QC H3X 2H9

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

As an example, to calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (ISA certified arborist).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

1800 Boulevard Saint-Joseph
Montréal, QC H8S 2N4

Payment method

Click on the place to see accepted methods of payment.

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground. 

This permit is free of charge.

Diameter of the trunk

As an example, to calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it :

  • if it was located between 3 and 5 m from a future construction zone
  • if it risked causing the spread of a disease or an invasive exotic species

You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

By appointment
55 Avenue Dupras
Montréal, QC H8R 4A8

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Mount Royal heritage site

If you live within the Mount Royal heritage site, you are required to obtain an additional permit.

Complete the form below (in French) and include it in the documents to provide.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Documents

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell
  • Planting plan showing the location of the replacement tree(s)

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate
  • Mount Royal heritage site form

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

201 Avenue Laurier Est
Fifth floor
Montréal, QC H2T 3E6

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

815 Rue Bel-Air
First floor
Montréal, QC H4C 2K4

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

15795, boulevard Gouin Ouest
(on the 2nd floor, rear door of the citizen reception and public safety office)
Montréal, QC H9H 1C5

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

You are not required to replace a felled ash tree if your property already has one tree per 200 m2 of undeveloped land, except in the two following cases:

  • if the ash tree was felled because it was located between 3 and 5 m from the area occupied by a retaining wall or a future construction
  • if the ash tree was felled due to an irreversible decline caused by a disease or a pest 

In both cases, you can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

By appointment
6854 Rue Sherbrooke Est
Montréal, QC H1N 1E1

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

4241 Place de l'Hôtel-de-Ville
Montréal, QC H1H 1S4

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (ISA certified arborist).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Mount Royal heritage site

If you live within the Mount Royal heritage site, you are required to obtain an additional permit.

Complete the form (in French) and include it in the documents to provide.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it:

  • if it was located between 3 and 5 m from a future construction
  • if it risked causing the spread of a disease or an invasive exotic species

You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate
  • Mount Royal heritage site form

Communication channels

In person

Cour de services - Outremont

600 Avenue de la Gare-de-triage
Montréal, QC H2V 0A8

Fill out the form (in French) and bring it with you.

Opening hours

Monday to Thursday: From 7 a.m. to 11:45 a.m. and from 1 p.m. to 3 p.m.

Friday: From 7 a.m. to 11:30 a.m. 

Payment methods

Cash
Credit card (MasterCard, Visa)
Debit card
Cheque payable to “Ville de Montréal”

Legislation

If your ash tree has a red ribbon attached to it, it means your tree is diseased (emerald ash borer) and you need to apply for a permit to have it felled.

Do you wish to have your ash tree felled for another reason? Check out the permitted reasons for felling (see below).

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it:

  • if you felled it to redevelop your yard
  • if it risked causing the spread of a disease or an invasive exotic species

 You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Document

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

13665 Boulevard de Pierrefonds
Montréal, QC H9A 2Z4

Fill out the form and bring it with you.

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge. (After the permit is issued, a reimbursement will be made if the applicable conditions have been met.)

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

You are not obliged to replace your felled ash tree.

If you decide to replace it, you can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

12090 Rue Notre-Dame Est
Montréal, QC H1B 2Z1

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell
  • Planting plan (ideally on a copy of the certificate of location)

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf of the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

5650 Rue D'Iberville
Second floor
Montréal, QC H2G 2B3

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf of the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

777, boulevard Marcel-Laurin
Saint-Laurent, QC H4M 2M7

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

You are not obliged to to replace your felled ash tree. However, if you decide to replace it, you can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf of the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

8400 Boulevard Lacordaire
Montréal, QC H1R 3B1

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

Once your ash tree has been felled, you are required to replace it. You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf of the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

4555 Rue de Verdun
Suite 109
Montréal, QC H4G 1M4

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Mount Royal heritage site

If you live within the Mount Royal heritage site, you are required to obtain an additional permit.

Complete the form below (in French) and include it in the documents to provide.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

You must replace each felled ash tree, except if the property already has at least one tree per 200 m2 of undeveloped land.

If the tree is replaced, you can: 

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Document

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate
  • Mount Royal heritage site form

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

800 Boulevard De Maisonneuve Est
ground floor
Montréal, QC H2L 4L8

Legislation

You are required to obtain a permit to fell an ash tree equal to or greater than 10 cm in diameter, measured 1.4 m from the ground.

This permit is free of charge.

Diameter of the trunk

To calculate the diameter of the trunk before applying for a permit:

  1. Use a tape measure.
  2. Measure around the trunk in cm.
  3. Divide your measurement by 3.14 to obtain the diameter in cm.

Example: If the trunk measures 35 cm, the diameter is 35/3.14 = 11 cm

Another way to obtain the diameter is to use a rigid tape measure and hold it horizontally against the tree to measure the width (or thickness) of the trunk. You will get an approximate diameter.

Reasons for felling a tree

You can apply  for a permit to fell an ash tree with a diameter equal to or greater than 10 cm, measured 1.4 m from the ground, in the following cases:

  • The ash tree is dead or is in an irreversible state of dieback caused by disease.
  • Its structure and solidity are affected.
  • It risks causing serious damage to property.
  • It poses a danger to public safety.
  • It is located in a future construction zone or is less than three metres from that zone (except if it is an advertising sign), in which case you must have obtained a permit for the related work operations before applying for a tree-felling permit.
  • It risks causing a disease or an invasive species to spread.

In this case, the borough may ask you to prove that the ash tree is sick or houses a pest, or it may ask you to provide an expert report (forest engineer or agronomy engineer).

  • Our teams have issued a notice of felling for this ash tree.

Restrictions

Under no circumstances are you authorized to fell an ash tree:

  • because it is losing its blossoms, leaves, sap or twigs
  • because it produces pollen, is home to animals or insects, or creates shade
  • because the roots are visible above the surface of the ground

It is also prohibited to fell an ash tree on public property, such as on the strip of land between the curb, the sidewalk and your property line.

Permit validity

Once the tree-felling permit is issued, you have 365 days (one year) to have your ash tree felled, or you risk being fined.

Replace a felled ash tree

You are not required to replace a felled ash tree, except in the two following cases:

  • if the ash tree was located between 3 and 5 m from the area occupied by a retaining wall or a future construction
  • if it could lead to the spread of a disease or an invasive species

You can:

  • Replace it yourself, at your own expense. In this case, you will not be able to obtain the subsidy offered to reimburse a portion of the felling costs.
  • Have it replaced free of charge by the city. In this case, you must fill out the subsidy form.

Subsidy

You can ask for a subsidy to reimburse a portion of the felling cost.

To be eligible for the subsidy, you must meet 4 conditions:

  • You must have obtained a felling permit.
  • The felled ash tree must have a diameter equal to or greater than 15 cm, measured 1.4 m from the ground.
  • You must authorize the city to replace your ash tree.
  • You must respect the deadline: the subsidy must be requested at the latest 1 year after the felling work is carried out.

Required documents

  • Plan showing the location of the ash trees to fell (number each ash tree to fell and note its diameter)
  • Photo of each ash tree to fell

If applicable:

  • Ash tree felling notice sent by the city
  • Power of attorney authorizing you to act on behalf on the owner
  • Letter of authorization from each co-owner or resolution from the condominium syndicate

Communication channels

Payment method

  • Credit card (MasterCard, Visa)

You must have an account on montreal.ca to use this service.

Point of service

405 Avenue Ogilvy
Suite 111
Montréal, QC H3N 1M3

Legislation